Co-authored-by: jack <0x6a73@protonmail.com>

Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: jack <0x6a73@protonmail.com>

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>

Co-authored-by: jack <0x6a73@protonmail.com>

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: jack <0x6a73@protonmail.com>

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>

After qmk#21169, rgb_matrix_indicators() was limited to running on the
final render iteration. Since the jellybean_raindrops animation
immediately returns false after updating a single LED, the iteration
count no longer ends up high enough to render non-advanced indicators.

This change also brings jellybean_raindrops more in line with raindrops.

…1805)

Although `keychron/c2_pro/ansi/rgb` and `keychron/c2_pro/ansi/white` use
the same custom matrix code, the matrix layouts are slightly different;
in particular, only the `keychron/c2_pro/ansi/white` board actually uses
column 19.  However, the handling of column 19 in the custom matrix code
was broken, therefore that column did not work.

Looks like the custom matrix code assumes that `SHIFT_COL_END` refers to
the last column connected to the shift register, and not to the column
past that; so the value of `SHIFT_COL_END` needs to be changed from 19
to 18 (columns 11...18 are connected to the shift register, and column
19 is connected to the C14 pin).

Also the code which was determining `SIZE_T` and `UNSELECT_ALL_COL` had
an off-by-one bug when counting the required number of bits (again due
to the confusion on the `SHIFT_COL_END` meaning); this had been fixed
too (the actual behavior of that part of the code did not change,
because both the old and the new version select the 8 bit variant).

* vinh: test fw for uncertainty (deprecated)

* v0.1: update base firmware with 2 layers, use bongo cat animation for oled

* v0.1: change directory

* v0.1: cleanup

* v0.2: update layers

* v0.3: add VIA support

* v0.3: add VIA support (continue)

* vinh: test fw for uncertainty (deprecated)

* v0.1: update base firmware with 2 layers, use bongo cat animation for oled

* v0.1: change directory

* v0.1: cleanup

* v0.2: update layers

* v0.3: add VIA support

* v0.3: add VIA support (continue)

* v0.3: change keyboard name, remove eeprom config save in VIA keymap

* cleanup for PR

* update readme

* vinh: test fw for uncertainty (deprecated)

* v0.1: update base firmware with 2 layers, use bongo cat animation for oled

* v0.1: change directory

* v0.1: cleanup

* v0.2: update layers

* v0.3: add VIA support

* v0.3: add VIA support (continue)

* vinh: test fw for uncertainty (deprecated)

* v0.1: update base firmware with 2 layers, use bongo cat animation for oled

* v0.1: change directory

* v0.1: cleanup

* v0.3: change keyboard name, remove eeprom config save in VIA keymap

* cleanup for PR

* update readme

* add license to header files, update ws2812 driver and DI_PIN to info.json

* resovle PR suggestion for config.h, halconf.h, mcuconf.h

* update info.json regarding PR comment

* update bongo.h regarding PR comment

* add oled mode toggle

* update readme.md, rules.mk regarding PR comment

* add submodule update

* move oled handle to keyboard level

* Update keyboards/vinhcatba/uncertainty/uncertainty.c

forgot user-level proces_record

* now using bongo as source file

* Apply suggestions from code review

remove default value codes

* move WPM_ENABLE and ENCODER_MAP_ENABLE to keymap level

* Apply suggestions from code review

* Apply suggestions from code review

* Update keyboards/vinhcatba/uncertainty/config.h

* Added new handwired, the Split-Cloud

* Minor changes to make clang-format happy

* Alligned files with project standard.

Trimmed midi out of the default layout, modified the readme, and removed unnecessary files.

* Simplified default keymap further, changes to info.json

* Moved image to imgur, simplified, and removed the unneeded rules.mk file

* Update keyboards/handwired/split_cloud/readme.md

Changed image in readme to Huge Thumbnail instead of Original.

* Removed unneeded tri layer custom keycodes

Now using the built-in functionality!

* Update keyboards/handwired/split_cloud/readme.md

Accidentally reverted this when making other changes

`Stes` -> `Sets`

* Added support keyboard Nyx

* Resolved zvarc suggested and lint error

* Delete FORCE_NKRO due to problem with BIOS on mainboard

* Resolved dunk2k suggested and limit more brightness, disable some RGB Effect

* Resolved drashna suggested

* Delete flower blooming effect and move to rev1 folder

* Add MIIIW BlackIO83

* Improve the code

* Updated instructions for entering the bootloader

* Update keyboards/miiiw/blackio83/rev_0100/config.h

* Update keyboards/miiiw/blackio83/rev_0100/config.h

* Update keyboards/miiiw/blackio83/config.h

* Update config.h

* Add keybord monsgeek m3.

* Add keybord monsgeek m3.

* Add keybord monsgeek m3.

* updata rules.mk

* add readme.md

* delete monsgeek\m3\rgb_matrix_kb.inc

* add DISABLE_M3_KEYCODES

* user_config --> kb_config

* Move code to info.json,and removed redundant features

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/info.json

* Update readme.md

* Update keyboards/monsgeek/m3/config.h

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/keymaps/default/keymap.c

* Update keyboards/monsgeek/m3/keymaps/via/keymap.c

* Update keyboards/monsgeek/m3/readme.md

* Update m3.c

* Update m3.c

* Update info.json

* Update keymap.c

* Update keymap.c

* Update config.h

* Update keyboards/monsgeek/m3/readme.md

* Update keyboards/monsgeek/m3/rules.mk

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/keymaps/default/keymap.c

* Update keyboards/monsgeek/m3/keymaps/via/keymap.c

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/info.json

* Update m3.c

* Update keyboards/monsgeek/m3/info.json

* Update keyboards/monsgeek/m3/m3.c

* Update keymap.c

replace the tabs with spaces

* Update keymap.c

replace the tabs with spaces

* initial h101 commit

* update keymap and add via support

* update doc stuff

* readme typo

* updates

* add indicator LEDs, needs testing

* update readme

* update USB VID/PID to match VIA json

* Update keyboards/hineybush/h101/readme.md

* Update keyboards/hineybush/h101/keymaps/default/keymap.c

* Update keyboards/hineybush/h101/readme.md

* Update keyboards/hineybush/h101/keymaps/via/keymap.c

* updates from PR comments

* updates per PR comments

* idk why the folder is acting weird

* maybe this will fix it

* update to hopefully fix everything weird

* keycode fixes

* keymap updates

* add 60_(ansi|iso)_tsangan_wkl* layouts

* Update keymap.c

* `tsangan_wkl` to `wkl`

* update info.json

* split backspace changes

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: 4pplet <4pplet@protonmail.com>
Co-authored-by: 4pplet <stefan.ess@gmail.com>

Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>

* add 60_(ansi|iso)_tsangan_split_bs_shift layouts

* shift to rshift

* remove 60_ansi_tsangan_split_bs_rshift

* Update layouts/default/60_iso_tsangan_split_bs_rshift/info.json

Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: lesshonor and waffle87
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: lesshonor
Co-authored-by: itsvar <120035196+itsvar8@users.noreply.github.com>

* Add support for Envious.Design Keyboards

Add various RP2040 keyboards I've designed.

* Fixed missing newlines at EOF.

* Ran CLANG-FORMAT and sorted out any potential issues.

* Gave keyboards all unique product IDs

* Made requested changes.

* removed all VIAL related code
* sorted out license on all *.h or *.h  files
* removed outdated RESET Keycode

* missed some VIAL bits

* Made suggested changes

* Made Suggested Changes

* missed one file to change.

* Attempted fix of CI issues

* Update .gitmodules

* Revert "Update .gitmodules"

This reverts commit f4bace5.

* hopefully fixed all CI and QMK lint issues

* resolve more CI errors and a couple typos

* fixed last remaining issue as of now

* made requested changes

* further more on suggested change

* Delete README.md

* derpy workaround to change case of readme

* finished up 65M firmware

via does not work, I will investigate another time.

* re-did a lot of 65M firmware bits, also fixed via for this board

* corrected mistake in firmware

* made suggested change to info.json for 65m/60F

* finished 65M non via keymap and re-sorted via keymap

* Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c

* Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c

* Apply suggestions from code review

Verified updated Info.json works for aforementioned keyboards,

* Follow-up commit with aforementioned suggested changes

* Apply suggestions from code review

correction to a couple typos pointed out.

* follow-up removed some un-needed Readmes and corrected a mistake in 60F via keymap

* Apply suggestions from code review

* Added images of PCB to each Keyboard README

* Apply suggestions from code review

* Update keyboards/enviousdesign/60f/readme.md

* Added missing aspects of info.json and corrected RGB_DI_PIN to WS2812_DI_PIN in RGB keyboard

* made requested changes

* Update config.h

* used QMK migrate to update info.json

* Apply suggestions from code review

* Update keyboards/enviousdesign/65m/info.json

* renamed named keyboards as suggested and added commission keyboard to repo

* renamed file to hopefully please lint

* renamed things to be all lower case since lint doesn't appear to look for upper case

* updated keymap.c and removed unnecessary file

* fixed readme and a couple other bits

* converted various aspects to json information

* attempt fix for lint error

* fix some issues I overlooked

* Apply suggestions from code review

* moved some folders about as suggested

* Made suggested changes

* Apply suggestions from code review

* removed outdated config.h

* fixed errors in 65M and mini1800

* Apply suggestions from code review

* Update keyboards/enviousdesign/delirium/rev1/info.json

* Update keyboards/enviousdesign/65m/info.json

* Apply suggestions from code review

* [Keyboard]add v83p keyboard.

* Update keymap.c

* Update keyboards/inland/v83p/keymaps/via/keymap.c

* Update keyboards/inland/v83p/keymaps/default/keymap.c

* Update keyboards/inland/v83p/config.h

* Update keyboards/inland/v83p/info.json

* Update info.json

* Update keymap.c

* Update keyboards/inland/v83p/mcuconf.h

* Update keyboards/inland/v83p/halconf.h

* Update keyboards/inland/v83p/info.json

* Update keyboards/inland/v83p/v83p.c

* Update keymap.c

replace the tabs with spaces

* Update keymap.c

replace the tabs with spaces

* Update keyboards/inland/v83p/info.json

* initialise rpneko65, info.json

* force NKRO

* define WS2812 stuff

and capitalise RPNeko65

* use RGBlight, add ANSI to keymap.c

also remove _ADC suffixes from pins

* basic readme

plus making it so the info.json RGB values are actually recognised as integers

* update repository URL

* fix info.json formatting

* caps lock LED implementation

"borrowed" from waffling60

* put RGBLIGHT_ENABLE in json

also remove "pin" from the rgblight option

* add actually correct keymaps

also reformat info.json

* move to designer folder, add image to README

* move keyboard to separate revision folder

and remove erroneous tag from config.h

* remove brightness/hue/saturation steps

* change device version to 1.0

* move quantum.h include to top

* actually, let's try a new image

I also forgot to save the info.json file beforehand
oops

* Remove comma in info.json

* Community layouts in info.json

* Delete rpneko65/readme.md

* Apply suggested changes to readme

* Suggested code changes

* Suggested imgur link

* rename code file

this was the issue all along
sigh

* Correct layer matching this time

* Move Enter in info.json

* README/info.json change

* Another batch of suggestions

* add alice* to keyboards

* add seigaiha

* additions

* Update info.json

* revert wanderland

* add tgr/alice

* add matrix diagram.md

Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>

* ADD Keyboard

* Resolved requested changes

* update keymap.c file

* resolved requested changes

* updated info.json file

* Updated requested changes

* Delete JK01.h file

* Resolved requested changes

* Delete readme.md

* add rules.mk to default folder

* Upload default/keymap.c

* Add via/keymap.c

* Updated info.Json file

* Change VID in info.json

* Resolved requested changes

* Resolved requested changes.

* Resolved requested changes

* Updated changes

---------

Co-authored-by: gksygithub <gskyGit@gsky.com.tw>